Troubleshooting Tip: After a failover, FortiAP dev...

Adolfo_Z_H · 05-28-2025

Description This article describes how to prevent neighbourly FortiAPs from choosing the same channel after DARRP calculation. Scope FortiGate v7.0 and up, FortiAP. Solution Sometimes after a DARRP calculation, neighbourly FortiAP may end transmittin...

Adolfo_Z_H · 04-22-2025

Description This article describes how to avoid or solve a FortiLink Trunk failture after upgrading FortiOS with FortiLink-enabled FortiSwitches to 7.6.1 Scope FortiGate v7.6.1 and below. Solution Due to FortiLink protocol improvements, a new behavio...

Adolfo_Z_H · 02-10-2025

Description This article describes how to troubleshoot FortiAP unable to broadcast an SSID on the 6E band. Scope FortiAP 6E. Solution Ensure both FortiAP and FortiGate are using the latest GA version of each of these products, FortiAP v7.4.4 and Fort...

Adolfo_Z_H · 01-09-2025

Description This article describes how to get advice about recommended FortiSwitch software releases. Scope All FortiSwitch devices. Solution This article describes how to get advice about recommended FortiSwitch software releases. As a difference fr...

Adolfo_Z_H · 01-02-2025

Description This article describes how to use the boot menu on FortiAP to upgrade or restore firmware. Scope All FortiAP series except FortiAP-U series. Solution In some cases, FortiAP devices may fail to boot due to memory corruption. Use a serial c...

Adolfo_Z_H · 04-04-2025

Awsome Article!!!!!

Adolfo_Z_H · 10-17-2024

Nice article. Congratulations.

Adolfo_Z_H · 08-20-2024

Please open a TAC ticket to look in depth on your issue. Use FSW Serial number on it to be routed to FSW specialist.

Adolfo_Z_H · 08-19-2024

Please do this fix Enable the NTP server mode on the FortiLink interface. There must be an entry for the FortiLink interface in the configuration in order to use it as a server. This is a configuration example on Fortigate CLI: config system ntp set ...

Adolfo_Z_H · 08-19-2024

No CAPWAP IP address retrieved for FortiSwitch S108EP5920004250 <--- Means device is not capable to build CAPWAP tunnel for management. Most Frecuent cause of this issue is NTP sync fail between FGT and FSW.

User Statistics

User Activity

Technical Tip: How to prevent neighbourly FortiAP devices choose same channel after DARRP calculation

Technical Tip: FortLlink Trunk failture after upgrading FortiOS with FortiLink-enabled FortiSwitches to 7.6.1

Troubleshooting Tip: FortiAP are unable to broadcast a SSID on 6E band

Technical Tip: How to get advice about recommended FortiSwitch software release

Technical Tip: How to use boot menu on FortiAP

Re: Technical Tip: Wireless WMM QoS Downlink (FortiAP to Client Station) using FortiGate, FortiSwitch and FortiAP

Re: Troubleshooting Tip: FortiSwitch Spanning Tree Protocol (STP) troubleshooting guide

Re: Fortiswitch 108e showing offline

Re: Fortiswitch 108e showing offline

Re: Fortiswitch 108e showing offline

Troubleshooting Tip: After a failover, FortiAP dev...

Troubleshooting Tip: Common Wi-Fi tuning issues an...

Technical Tip: IPsec tunnel for FortiAP devices, d...

Technical Tip: FortLlink Trunk failture after upgr...

Troubleshooting Tip: FortiAP are unable to broadca...

Re: FortiAP Advanced Management License

KCS

Engage Services

Fortinet Xperts LATAM & Caribbean

User Statistics

User Activity

You are leaving our website